Technical

Production and Characteristics of High Strength Reinforcement Bars

Production and Characteristics of High Strength Reinforcement Bars During the last few decades, reinforced concrete construction has generally utilized reinforcement ...
Read More
/ cold working, Ductility, earth quake resistance, High strength, Micro alloying, Quenching and tempering, reinforcement bars, Strain aging, Technical, tensile strength, yield stress

Important aspects regarding Rolling of Wire Rods

Important aspects regarding Rolling of Wire Rods Wire rods are the steel product normally of round cross section which is ...
Read More
/ Coil forming chamber, Control cooling conveyor, Descaler, Finishing block, loop laying head, Reducing Sizing mill, Technical, wire rod, wire rod coil, wire rod mill

Consteel Electric Arc Furnace Process

Consteel Electric Arc Furnace Process Consteel process is a patented process. It is an innovative energy conservation technology for scrap ...
Read More
/ Consteel, Continuous charging, Dynamic seal, EAF, Flat bath, Post combustion, Preheater conveyor, scrap preheating, Slag foaming, Technical

Foaming of Slag in Electric Arc Furnace

Foaming of Slag in Electric Arc Furnace Slag foaming has become an important and critical practice for the modern electric ...
Read More
/ EAF, Foaming index, Long arc operation, Slag composition, Slag foaming, slag viscosity, superficial velocity, Surface tension, Technical

Foaming of Slag in Basic Oxygen Furnace

Foaming of Slag in Basic Oxygen Furnace In basic oxygen furnace (BOF) steelmaking, a supersonic oxygen (O2) stream is injected ...
Read More
/ BOF, BOF slag, De-carburization, Foam, Foaming index, Gas bubbles, Slag basicity, Slag density, slag viscosity, Superficial gas, Technical, Void fraction

Slopping of Slag in Basic Oxygen Furnace

Slopping of Slag in Basic Oxygen Furnace Steelmaking in basic oxygen furnace (BOF) is a batch process in which steel ...
Read More
/ Basicity, BOF, converter, Foaming, Gas generation, Hard blowing, O2 blowing, slag, Slag ejection, Slopping, Soft blowing, Spitting, Technical

Process Control of Technological Processes

Process Control of Technological Processes Technological processes consist of handling, working, refining, combining, and manipulating materials and fluids to profitably ...
Read More
/ Automatic control, controller, DCS, DDC, Distributed control system, Disturbance input, Feed back control, Feed forward control, Manipulated input, PLC, process control, SPC, Technical, Technological process

Refractory Lining of the Electric Arc Furnace

Refractory Lining of the Electric Arc Furnace Refractories are those materials which withstand high temperature without a significant change in ...
Read More
/ AC EAF, DC EAF, EAF, EBT, Fettling, guniting, hearth, magnesite, Monolithic lining, roof, Taphole, Technical

Preparation and Charging of Blast Furnace Burden

Preparation and Charging of Blast Furnace Burden Blast furnace (BF), except at its hearth, is basically a passage for gases ...
Read More
/ automation, bell less top, blast furnace, Burden materials, chute, Conveyor charging, Granular flow, Mixing, Percolation, segregation, stock house, Technical

Understanding Ironmaking in Blast Furnace and Dissection studies in Japan

Understanding Ironmaking in Blast Furnace and Dissection studies in Japan The blast furnace (BF) ironmaking is the most viable means ...
Read More
/ Alkalis, blast furnace, Blast temperature, Central working, cohesive zone, Dissection studies, gas flow, high top pressure, Pellet, sinter, Technical

Formation of Scaffold in Blast Furnace Shaft

Formation of Scaffold in Blast Furnace Shaft The term scaffold is used when there is accretion or scab formation on ...
Read More
/ Alkalis, BF burden, blast furnace, Build up. BF volume, coke, refractories, Scaffolds, Technical, zinc

Effect of Alkalis on Ironmaking Process in a Blast Furnace

Effect of Alkalis on Ironmaking Process in a Blast Furnace One of the main objectives during the operation of a ...
Read More
/ Alkali silicates, Alkalis, BF, BF lining, HM, scaffolding, slag, Technical, Top gas

Steel Cleanliness and Clean Steel Technologies

Steel Cleanliness and Clean Steel Technologies Steel cleanliness is an important factor which decides the quality of the steel. It ...
Read More
/ clean steel, cleanliness, deoxidation, Gases in steels, inclusions, N2 pick up, NMI, oxidation, slag, Technical

Electroslag Remelting Process

Electroslag Remelting Process Electroslag remelting (ESR) is the abbreviated name given to electroslag consumable electrode remelting and secondary refining process ...
Read More
/ Electroslag remelting, ESR, IESR, ingot casting, Macro segregation, Micro segregation, PESR, slag, Technical, VAC-ESR, yield

Production and Processing of Armour Steel

Production and Processing of Armour Steel In the present day environment, there are accelerated efforts to deliver lightweight armour technologies ...
Read More
/ Armour steel, continuous casting, hot rolling, inspection, Leveeler, Plate mill, Queching, slab, Technical, tempering, Ultra sonic testing

Voluntary support and help is solicited for the maintenance of the website

In case of Indian donors who want to donate by bank transfer, bank details can be provided on request . Go To Contact Us Page To Request My Bank Details

  • 11136% Funded
  • $1,007,796 Raised
  • $9,050 Required
Donation Amount

Voluntary support and help is solicited for the maintenance of the website

$
Select Payment Method
Personal Info

Billing Details

Donation Total: $5

In case of Indian donors who want to donate by bank transfer, bank details can be provided on request . Go To Contact Us Page To Request My Bank Details