Technical

Historical Development of Rolling Mills

Historical Development of Rolling Mills In metalworking, rolling is a metal forming process in which metal is passed through one or more pairs of rolls to reduce the thickness, ...
Read More
/ Belgian wire rod mill, Hydlrauic driven mill, Ingot rolling, Leonard da Vinci sketch, Manual mill, Plate mill, Rolling mill products, Rolling mill strucure, rolling mills, Steam driven mill, Technical

Contribution of Steel to the Circular Economy

Contribution of Steel to the Circular Economy There are two types of economies which exist around the world. These are ...
Read More
/ Circular economy, Ellen MacArthur diagram, Life cycle thinking, Linear economy, Recycling, Reduce, remanufacture, reuse, Steel by-products, steel scrap, Technical, Waste management, Waste materials

Hydrogen Steelmaking

Hydrogen Steelmaking Iron and steel production industry is the single largest sector in terms of total global fossil and industrial ...
Read More
/ Chaudron diagram, Circored, Fe/FeO equilibrium diagram, Flash ironmaking, GHG, H2-DRI, HYBRIT process, Hydrogen steelmaking, Solar power, Technical, ULCOS, Wind power

Carbon Neutral Steelmaking

Carbon Neutral Steelmaking Iron and steel production industry is the single largest sector in terms of total global fossil and ...
Read More
/ Allam cycle, Biomass, CCS, CCU, CO2 emissions, DRI, EAF, Electro winning, Electrolysis, GHG, HYBRIT process, Hydrogen based reduction, Technical, ULCOS

Optical Microscopy

Optical Microscopy  Microscopy studies the enlargement of the image of the objects which are too small to be properly seen ...
Read More
/ Contrast, Depth of field, Eyepiece, Illumination, Image, Interference, magnification, Micro hardness, Micro photography, micro structure, Microscope, objective, Optical microscopy, Technical

Non destructive Testing Techniques

Non destructive Testing Techniques There can be inherent microscopic flaws in materials due to crystal lattice imperfections. Also, manufacturing processes ...
Read More
/ eddy current testing, Liquid penetrant testing, Magnetic testing, NDT techniques, Optical technique, Radiographic testing, Technical, ultrasonic testing, visual inspection

Shape Control Technologies in Hot Strip Mill

Shape Control Technologies in Hot Strip Mill The shape of a rolled strip is characterized by its transverse section profile ...
Read More
/ Back up roll bending, Bottled roll, Centre buckle, crown, CVC, Edge buckle, Flatness, Hot strip, Roll shifting, Shape control, Shaped roll, Taper piston roll, Technical, Variable crown, Work roll bending

Automation and Thickness Control in Hot Strip Mill

Automation and Thickness Control in Hot Strip Mill The economic efficiency of metal rolling processes is strongly correlated to the ...
Read More
/ AGBG/ MGBG, AGC, automation, HGC, Hot strip mii, HTC, LCS, LCT, Load cell, Mill modulus, SAS, SC, TC, Technical

Shape and Gauge Control of Strip in a Cold Rolling Mill

Shape and Gauge Control of Strip in a Cold Rolling Mill The economic efficiency of metal rolling processes is strongly ...
Read More
/ AFC, AGC, GBC, GFG, GMC, HGC, reversing mill, SC, tandem mill, TCG, TCS, TCT, Technical

Analysis by X-ray Fluorescence Spectrometry

Analysis by X-ray Fluorescence Spectrometry X-ray fluorescence (XRF), is an emission spectroscopic technique which has found wide application in the ...
Read More
/ absorption, Be winddow, Compton scatter, Detector, EDXRF, Fluorescent yield, radiation, Rayleigh scatter, Scatter, Technical, WDXRF, X-ray, X-ray tube, XRF

Metal Analysis by Optical Emission Spectroscopy

Metal Analysis by Optical Emission Spectroscopy Optical emission spectroscopic techniques originated in experiments performed in the mid 1800s, yet they ...
Read More
/ Diffraction grating, Emission source, Emission spectrum, Optical system, Spark, Spectrometer, Spectroscope, Spectrum, Technical, wave length, waveform

Continuous Casting Mould

Continuous Casting Mould In the continuous casting process, liquid steel flows from a ladle, through a tundish into the mould ...
Read More
/ Casting speed, Continuous casting machine, copper, CuAg, DHP, funnel mould, lubrication, Meniscus, mould, mould oscillation, mould powder, Plate mould, Technical, Tube mould.

Annealing of Steels

Annealing of Steels When a metal is cold worked (deformed at room temperature), the microstructure becomes severely distorted because of ...
Read More
/ annealing, Annealing cycles, Critical temperatures, Full annealing, grain growth, Inter critical annealing, Process annealing, Spheroidizing, Sub crital annaling, Technical

Forging of Carbon and Alloy Steels

Forging of Carbon and Alloy Steels Forging of carbon (C) and alloy steels constitutes a metal working process, which has ...
Read More
/ Anisotropy, cold heading, Die forging, forging, Forging lubricants, Forging steels, Fracture toughness, Grain flow, grain size, Residual stress, Technical, Thermal processing

Corrosion in Carbon Steels

Corrosion in Carbon Steels As per ISO 8044:2010, ‘corrosion is the physico-chemical interaction between a metal and its environment, which ...
Read More
/ atmospheric corrosion, corrosion, Corrosion protection, crevice corrosion, Electro-chemical reaction, Environmental induced cracking, galvanic corrosion, Inter crystalline corrosion, pitting corrosion, Technical

Voluntary support and help is solicited for the maintenance of the website

In case of Indian donors who want to donate by bank transfer, bank details can be provided on request . Go To Contact Us Page To Request My Bank Details

  • 11136% Funded
  • $1,007,796 Raised
  • $9,050 Required
Donation Amount

Voluntary support and help is solicited for the maintenance of the website

$
Select Payment Method
Personal Info

Billing Details

Donation Total: $5

In case of Indian donors who want to donate by bank transfer, bank details can be provided on request . Go To Contact Us Page To Request My Bank Details