Technical

Types of Burners in Reheating Furnaces

Types of Burners in Reheating Furnaces Presently steel industry is facing major challenges of the continuous reduction of the  environmental ...
Read More
/ burners, flat flame, long flame, oxy fuel, recuoerators, regenerator, Reheating furnace, Technical

Recovery of Waste Heat

Recovery of Waste Heat  Waste heat is the heat which is generated in a process due to the combustion of ...
Read More
/ Heat bexchangers, Heat pump, recuperators, Regenrators, Technical, waste heat boiler, Waste heat recovery

CLU process for Stainless Steel Production

CLU process for Stainless Steel Production Stainless steel production process has some basic features such as carbon (C) removal, deoxidation ...
Read More
/ AOD process, argon, CLU process, decarburization, stailess steel, steam, Technical

Refractory Lining of a Continuous Casting Tundish

Refractory Lining of a Continuous Casting Tundish In the continuous casting (CC) of steels, tundish is a buffer refractory lined ...
Read More
/ Continuous casing, Dry lining, erosion, inclusion, lining boards, refefractory lining, sprayable lining, Technical, Tundish

Failure Analysis

Failure Analysis Failures of equipment components and assemblies, or structures in industry can cause loss of life, unscheduled shutdowns, increased ...
Read More
/ cause of failure, crack, Data, failure analysis, inspection, mode of failure, Technical, testing

Defects in Continuous Cast Steels

Defects in Continuous Cast Steels Continuous casting (CC) is the process which converts liquid steel into a solid product mainly ...
Read More
/ continuous casting, cracks, Defects, inspection, mould, seconday cooling, surface defects, Technical, Tundish

Blast Furnace and its Design

Blast Furnace and its Design The design of a blast furnace (BF) plays a fundamental role in its reliable operation, ...
Read More
/ belly, blast furnace, bosh, cast house, cooling element, design, Technical, top equipment

Iron Ore Pellets and Pelletization Process

Iron Ore Pellets and Pelletization Process Pelletizing of iron ore was started in the 1950s to facilitate the utilization of ...
Read More
/ bentonite, binder, Grate kiln, induration, Pelletization. Pellets, straight grate, Technical

Sinter Quality and Process of Sintering Iron Ores

Sinter Quality and Process of Sintering Iron Ores Sinter is normally the major component of the blast furnace (BF) charge ...
Read More
/ mineral phases, RDI, RI, SFCA, sinter, sinter bed, Technical

Carbonization of Coal for Metallurgical Coke Production

Carbonization of Coal for Metallurgical Coke Production Carbonization of coal is also known as coking of coal. The process consists ...
Read More
/ beehive ovens, byproduct ovens, carbonization, coke oven, coking, non recovery ovens, Technical

Steel Teeming Ladle and its Refractory Lining

Steel Teeming Ladle and its Refractory Lining Steel teeming ladle (STL) is needed in a steel plant to contain and ...
Read More
/ porous plug, refractories, rinsing, Secondary refining, Slide gate, Steel teeming ladle, Technical

Breakouts during Continuous Casting of Liquid Steel

Breakouts during Continuous Casting of Liquid Steel One of the worst catastrophic process failures that can occur during the process ...
Read More
/ breakouts, casting powder, CC moulds, continuious casting machine, continuous casting, spray cooling, Technical

Argon Rinsing of Steels

Argon Rinsing of Steels Gas rinsing process is a method where rinsing of liquid steel in the teeming ladle is ...
Read More
/ argon. argon gas, homogenization, liquid steel, porous plug, purging, Technical, teeming ladle

Industrial High Capacity Metal Granulation – Application & Results from Over 40 Installations

Industrial High Capacity Metal Granulation – Application & Results from Over 40 Installations Mr Per Vesterberg, UHT Sweden Dr Kristina ...
Read More
/ Technical

Granulation of Liquid Iron

Granulation of Liquid Iron Granulation of liquid iron is a method of handling of excess production of hot metal in ...
Read More
/ blast furnace, granulated iron, granulation process, Liquid iron, PCM, Pig iron, Technical

Voluntary support and help is solicited for the maintenance of the website

In case of Indian donors who want to donate by bank transfer, bank details can be provided on request . Go To Contact Us Page To Request My Bank Details

  • 11136% Funded
  • $1,007,796 Raised
  • $9,050 Required
Donation Amount

Voluntary support and help is solicited for the maintenance of the website

$
Select Payment Method
Personal Info

Billing Details

Donation Total: $5

In case of Indian donors who want to donate by bank transfer, bank details can be provided on request . Go To Contact Us Page To Request My Bank Details