Characteristic Features of Rotary Kilns
…a misaligned drum can result in extensive downtime. Also, a drum which is out of alignment can accelerate wear on the tyres, trunnion wheels, and thrust rollers, all of which…
Read More…a misaligned drum can result in extensive downtime. Also, a drum which is out of alignment can accelerate wear on the tyres, trunnion wheels, and thrust rollers, all of which…
Read More…can be assisted with heat depending on the material. Crushing – Crushing is done with different types of metal crushers. Crushing is used in the processing of thin or dirty…
Read Morean undefined tap hole diameter and sometimes in slowly running casts. These slowly running casts may also be retarded by a decreased hot metal temperature of the salamander, caused by…
Read More…trucks. A leaf chain used on a lift truck is normally under a substantial static load from the trucks lifting carriage. In addition, the chain withstands the nominal working load…
Read More…on each side of the taphole. Ideally the layout should be such that the runners are kept as short as possible. With tilting or swinging runners and high capacity hot…
Read More…support structure stiffness sufficiently higher than overall stiffness of isolation system in order to get the desired isolation efficiency. The support structure, a 3-D elevated structural system, possesses several natural…
Read MorePiles and Pile Foundation Foundations provide support to the structure and transfer the loads from the structure to the soil. But the layer at which the foundation transfers the load…
Read More…bainite) structure instead of the normal polygonal ferrite structure, and (v) dual-phase steels which are processed to a micro-structure of ferrite containing small uniformly distributed regions of high carbon. Dual…
Read More…described below can be used for combining upsetting with extrusion operations, as well as for combining forward-backward extrusion and multiple extrusion operations. Backward extrusions need to have a minimum reduction…
Read More…to a non-uniform transformation, resulting in bands of martensite in the microstructure. This is considered to be a defect, called centre-martensite. Segregation can be observed at the centre of the…
Read More