Refractory lining of a Basic Oxygen Furnace
…to attain an extended life on a lining. It consists of gunning refractory material normally a monolithic on the areas which encounter severe wear out such as trunnions, and the…
Read More…to attain an extended life on a lining. It consists of gunning refractory material normally a monolithic on the areas which encounter severe wear out such as trunnions, and the…
Read More…continuous improvement is to focus on the basic processes which run the organization. It is this concentration which delivers the outputs for the achievement of the organizational objectives, priorities, and…
Read More…highest, (ii) processing the feed in a crude argon column which returns the nitrogen to the low pressure column which produces a crude argon product, (iii) warming the crude argon…
Read More…containing as-rolled DP steels does not require the post rolling inter critical heat treatments. These steels develop the dual phase (ferrite and martensite) structure directly at the hot rolling mill….
Read More…the ladle and lining are continuing. STLs are lined with arch-wedge or keyed type of brick construction. Other type of brick construction uses semi-universal shapes which allow the use of…
Read More…is featured by large sizes and their origin cannot be immediately recognizable, although their presence can strongly affect the micro structural soundness of the steels and the associated mechanical reliability….
Read Moretrade off in the use of material and complex structures. Typically, a complex structure requires more labour and fabrication than a simpler structure, which uses more material. There is also…
Read More…construction sites, vehicle exhausts, industrial plants, unpaved roads, and come in many shapes and sizes. Some are large enough to be seen with the naked eye, whereas others can only…
Read More…forging. The shape of steel ingots usually resembles a truncated pyramid or truncated cone with the side surfaces may be corrugated and the corners more or less rounded. Steel ingots…
Read More…wear resistant steels, etc.) are being classified according to many different systems, including composition, microstructure, application, or specification. The easiest way to classify steels is by their chemical composition. Different…
Read More