Management of Man and Machine
…number of activities previously done by human beings have been taken over by the automation. But this has not eliminated the need for operator for the running of the equipment/process…
Read More…number of activities previously done by human beings have been taken over by the automation. But this has not eliminated the need for operator for the running of the equipment/process…
Read More…casing and a governor speed of 3,000 rpm. TRT normally adopt brushless excitation synchronous power generator. The generator is usually designed suitably to operate under all loading conditions imposed by…
Read More…accepted on a commercial scale and has led to major advances in blast furnace performance. Other articles on pellets and pelletization process are available under following links. http://www.ispatguru.com/iron-ore-pellets-and-pelletizing-processes/ http://www.ispatguru.com/iron-ore-pellets/ http://www.ispatguru.com/iron-ore-pellets-and-pelletization-process/…
Read More…which is the change of the original cross section in comparison to the cross section at rupture, (iv) good creep rupture strength which is a kind of tensile strength taking…
Read More…stable pouring rates, (iii) hot metal runner is to be as short as possible to avoid hot metal freezing, and (iv) the runner is to be preheated between the pouring…
Read More…and eventually spoil relationships. Rumours are the biggest enemy for a healthy and an effective interpersonal relationship. An employee must not believe in any rumours nor does he contribute to…
Read More…is ‘r = ew/et’, where ‘ew’ is the true strain in the width direction, and ‘et’ is the true strain in the thickness direction. Sheet metal is anisotropic, i.e., the…
Read More…coke structure. The coke at this stage still contains substantial volatile matter. As the temperature increases further beyond 600 deg C, the destructive distillation reaction continues with the evolution of…
Read More…zero aspiration. Typical obstructions to this are crushed gaskets, poor vertical ladle shroud alignment, and cracks in the refractory. Very good numbers for ladle-tundish nitrogen pick-up are of the order…
Read More