Water used in Steel Plant and its Types
…the site should be near the treatment facilities usually situated in the steel plant so that the cost of conveying water to the plant is less. The intake must be…
Read More…the site should be near the treatment facilities usually situated in the steel plant so that the cost of conveying water to the plant is less. The intake must be…
Read Morein tension because of improper handling, over loading of the instrument, improper calibration, or faulty instruments. Instrumental errors are inherent in measuring instruments, because of their mechanical structure. Instrumental errors…
Read More…are arranged with a body-centered cubic (bcc) crystal structure in ferrite and an fcc crystal structure in austenite. In both ferrite grains and austenite grains, this atomic structure does not…
Read More…the soft products of transformation are suppressed and the harder constituents i.e., bainite and martensite, are formed. These latter micro-structures are undesirable in the annealed structure. Fig 1 shows representative…
Read More…the grain structure and to eliminate coarse grained microstructure got in previous working operations such as rolling and forging etc., (ii) to modify and improve cast dendritic microstructure and reduce…
Read More…forward extrusion, (ii) indirect or backward extrusion, (iii) impact extrusion, and (iv) hydrostatic extrusion. Fig 13 shows direct and indirect extrusion and idealized ram displacement load curves. Fig 13 Direct…
Read More…marked effect on coking pressure, fine crushing reducing the pressure. Crushing the constituents of a blend separately does not seem to present any particular advantage. A study has shown that…
Read More…the safety awareness amongst the employees. Involving all persons in site hazard assessments, behaviour observation and feedback exercises can promote positive safety attitudes and the focus of the employees towards…
Read More…construction stage of the plant. Enabling facilities during the construction of the project include power, water, storages, roads and rail tracks needed for construction, office buildings, construction workshop, and housing…
Read More…are the basic requirements from the refractories of BOF. Thermal spalling resistance Corrosion resistance Abrasion resistance Oxidation resistance Hot modulus of rupture BOF is lined normally with a permanent lining…
Read More