Load Lifting Slings
…the strands are laid in one direction, while the strands in the rope are laid in the opposite direction. The result is that the wire crown runs almost parallel to…
Read More…the strands are laid in one direction, while the strands in the rope are laid in the opposite direction. The result is that the wire crown runs almost parallel to…
Read More…and transporting the resultant sludge away, (iii) regenerating it by an acid regeneration process on site, or at an off-site facility, and reusing the regenerated acid, (iv) recovering the free…
Read More…the brick lining. Initially these were alumino-silicate based and later converted to magnesite based or basic type to assist with metallurgical practice. This lining provided a monolithic joint-free structure and…
Read More…produces larger bubbles and less stable foam. True foaming is not to be confused with simple gas hold-up of bubbles in a liquid. In the case of gas hold-up, the…
Read More…micro-structure and properties of the rolled product. A typical thermo-mechanical cycle and microstructural evolution during the rolling process is shown Fig 3. Fig 3 Time – temperature profile and microstructural…
Read More…softer than martensite. Unless prevented by B, these softer structures are formed during the cooling from the austenitization temperature, after annealing or hot working. The effect of B on hardenability…
Read More…open pores. The reduction gas can quickly penetrate through these pores into the pellet core and simultaneously attack the structure in several places. The structural change begins very early at…
Read More…fraction of the scattered tube spectrum reaches the detector and is present in the measured spectrum. In some cases, the tube lines of the spectrum interfere with lines coming from…
Read More…the steel below the Ms (start of martensite formation) temperature. After the entire microstructure of the steel gets converted into martensite, tempering of the martensite is done. During the tempering…
Read More…and building construction. TMCP is the sophisticated combination of well-defined deformation operations and well-defined heat treatment in a single production stage to control the microstructure of the steel being rolled….
Read More