The Process of Blowing-in of a Blast Furnace
The Process of Blowing-in of a Blast Furnace The process of starting a blast furnace after its construction or after its relining is called blowing-in. The blowing-in process is carried…
Read MoreEnergy Conservation in a Steel Plant
…are running in stable conditions and the equipments are kept in healthy condition by their systematic and timely maintenance. These actions result into optimized processes which in turn brings into…
Read MoreCrisis Management
…the organization’s people, structures, ability to operate, valuables and/or reputation. It takes into account management’s planning and automatic incident response, but must also dynamically deal with situations as they unfold,…
Read MoreManaging Usage of Water in an Integrated Steel Plant
…for explosion exists due to the presence of CO gas. The scrubber-based system usually incorporates separate quencher and venturi-type scrubbers for gas cooling and cleaning purposes. The auxiliary water systems…
Read MoreGears and their types
…metal-to-metal contact and resulting premature gear failure. Also, since the teeth mesh at an angle, a side thrust load is produced along each gear shaft. Thus, thrust bearings must be…
Read MoreMaterials needed for Steel Production in Basic Oxygen Furnace
…The phosphorus contents of the hot metal increases if the content of phosphorus is high in the blast furnace burden. Carbon and silicon are the chief contributors of energy. The…
Read MoreSteels as a Material for Rail Tracks
Steels as a Material for Rail Tracks Railways were originally uniquely identified with the material of their initial construction and now are technically identified by the characteristic contact of ?steel…
Read MoreMergers and Acquisitions
…other hand in case of external expansion, the organization acquires either a running organization or a unit of the running organization and grows overnight through corporate combinations. These combinations are…
Read MoreSteel Scrap and Scrap Sorting and Preparation Processes
…can be of either the belt-type or the drum-type. In the drum type process, a permanent magnet is located inside a rotating shell. Material passes under the drum on a…
Read MoreRomelt Process for Ironmaking
…of Science & Technology ‘MISiS’, Russia (formerly known as Moscow Institute of Steel and Alloys). The development work of the process started in 1978 when a group of ‘MISiS’ scientists…
Read More