…in specifications. Instrumented Charpy impact test The use of additional instrumentation (typically an instrumented tup) allows a standard Charpy impact testing equipment to monitor the analog load-time response of Charpy…
Read More…grain size which suppresses martensite formation. In case of bearing steel quality wire rods the benefits include the formation of pseudo-spheroidized microstructure with fine, well dispersed carbides. Also it avoids…
Read More…design of high rise buildings where steel is frequently the material of choice for structural members. At present, structural fire safety (fire resistance) of steel members is normally achieved through…
Read More…has (i) structures at dead-end, (ii) static poles, and bus supports and equipment stands. It has also got the grounding arrangement. Structures at dead-end are those structures where the transmission…
Read More…to cause the precipitation strengthening effect. Typically, CP steels have no retained austenite in the microstructure, but contain more hard phases like martensite and bainite. The microstructure of CP steels…
Read More…nucleation sites and can segregate at the interface of crystalline structures, hindering cell growth. Thermodynamic conditions are hence needed to refine the steel grains with the addition of REEs. The…
Read More…useful in steel making. magnesite ramming mixes of exceptional purity and stability are used primarily as lining materials for coreless type induction furnaces. Magnesite chrome fused grain ramming mixes provide…
Read More…metal-to-metal contact and resulting premature gear failure. Also, since the teeth mesh at an angle, a side thrust load is produced along each gear shaft. Thus, thrust bearings must be…
Read More…especially to furnace walls which are not covered by scrap or suitable foaming slag practice. The crucial point is to achieve this kind of information about the process. The parameters…
Read More