Oxygen and Steels
…etc. Oxygen is used in the processes of cutting, lancing, scarfing and welding of steels. Oxygen is also the cause of steel destruction by the processes of rusting, scaling and…
Read More…etc. Oxygen is used in the processes of cutting, lancing, scarfing and welding of steels. Oxygen is also the cause of steel destruction by the processes of rusting, scaling and…
Read More…(Fig 3b). By the early 1900s, water hydraulic horizontal machines with directly operated valves were being constructed with this second pass diametrically opposite the original radial pass for the purpose…
Read More…of the construction of the belt in conjunction with the idlers and other mechanical components. There are so many belt constructions. The rubber belt manufacturing industry is making rapid strides…
Read More…structural steel, (vi) hydraulic silicon bundles, (vii) number 1 bushelling (clips), (viii) short shoveling steel turnings (crushed), (ix) machine-shop turnings, (x) mixed turnings and borings, (xi) cast iron borings, (xii)…
Read More…rubber/elastomer content are expected to relax significantly as the rubber/elastomer decays at temperature. In case of fibre sheet jointing materials, thick materials exhibit increased relaxation over thin ones. Thus, the…
Read More…and other instruments which outline norms for what they consider to be acceptable business conduct for the organizations. CSR instruments frequently reflect internationally-agreed goals and regulations regarding human rights, the…
Read More…are not a sound investment. Such organizations sooner or later run into real difficulties. Sooner or later they run into tremendous losses, have to write off vast sums, and become,…
Read More…articles under links http://www.ispatguru.com/coking-coals/, and http://www.ispatguru.com/coal/. Coke is a solid carbonaceous material produced by destructive distillation (also known as carbonization) of low ash and preferably low-sulphur bituminous coal. Coal is…
Read More…mix increases. The thumb rule equation for the slag quantity is ‘Slag quantity (kg/ton of liquid steel) = 127 + 2.43 x percent DRI’. As per this thumb rule equation,…
Read More…upon. Majority of these items are standby or protective equipment. Run-to-failure – Run-to-failure is a failure management strategy which allows an equipment item to run until failure occurs and then…
Read More