Executives and Effectiveness
…get results. In fact, organizations are to run and being run with the persons which are available in a normal manner without any additional efforts. The literature on management development…
Read MoreHuman Resource Management
…management team disagrees with. Yet, the reality for several organizations is that their people remain (i) under-valued, (ii) under-trained, (iii) under-utilized, (iv) poorly motivated, and (v) perform well below their…
Read MoreImportance of Communication in the Organization
…lack of integrity. While employees can attempt to demand trust, it rarely works. Trust is best created by earning it with right acting, thinking, and decision taking. It is to…
Read MoreSteel ingots and their Casting during Steelmaking
the evolution of bottom pouring technology for casting of steel ingots. This process constitutes of a set up involving pouring sprue and runner system to deliver liquid steel into the…
Read MoreProduction of Tin Plates and Tin Free Steel
…product characteristics, including terminology, composition, mechanical properties, surface finish, and coating weights etc. Tin plates and tin free products are described in the articles whose links are http://www.ispatguru.com/tinplate/, and http://www.ispatguru.com/tin-free-steel/….
Read MoreEnergy Management in Small and Medium sized Re-rolling mills
…reasons which include (i) heat stored in the furnace structures, (ii) loss of heat from the furnace outside wall and structures, (iii) heat carried out by implements, tools, and equipment,…
Read MoreRole of Concentration and Priorities in Effectiveness
…but also they are welded into the structure through service rules and nearly become vested interests, with their own spokesmen. This is not too dangerous when the organization is small…
Read MoreOperational Discipline in Steel Industry
…discipline can also be considered as a mindset and commitment to strict adherence to standards, processes, and rules which govern operations in groups or individuals. It encompasses multiple operators, teams,…
Read MoreBreakouts during Continuous Casting of Liquid Steel
…the CC mould’s surface and its tearing. The steel shell constrained by the CC mould ruptures at the meniscus portion, and the liquid steel flows out of the ruptured portion…
Read MoreProcess Steam and its use in a Steel Plant
…or performance will be affected Free from air and incondensable gases which act as a barrier to heat transfer Clean, as scale (e.g. rust or carbonate deposit) or dirt have…
Read More