Role and Responsibilities of Project Manager in a Steel Project
…the construction site are usually minimal. Due to this there are several hardships which are faced by the work force working at the site. Project manager is to see that…
Read More…the construction site are usually minimal. Due to this there are several hardships which are faced by the work force working at the site. Project manager is to see that…
Read More…steels are often used in marine environments involving direct contact with seawater. Examples of such applications are ship construction and offshore drilling equipment. Alloy steels used in the construction of…
Read Morecrushing of ROM ore can be single stage (primary) crushing, double stage (secondary) crushing, triple stage (tertiary) crushing, or even the stage of quaternary crushing. Jaw, gyratory, cone, and roll…
Read More…enhance the properties of the quenched and tempered alloy. The microstructure (tempered martensite or bainite) produced by quenching and tempering low alloy steels is characterized by good toughness, that is,…
Read More…strict rules and with reduced vision. The managers have to develop and to promote a politics based on a communication system which allows them the permanent adjustment of structures and…
Read More…to a pre-determined plan. Breakdown maintenance is also known as reactive maintenance or run-to failure maintenance. It basically consists of running the equipment till it breakdown. No actions are taken…
Read Morecoarser than 5 mm). Depending on the ore characteristics, the crushing of crude ore can be single stage (primary) crushing, double stage (secondary) crushing, or triple stage (tertiary) crushing. The…
Read More…include architectural drawings, tender specifications and bill of quantities for structural works, structural design drawings, structural fabrication drawings, structural assembly drawings, building detail drawings, structure calculation data sheets, structure standard…
Read More…three most important refining sites are three (site 1 to site 3). Reaction site 1 is thought to be the phase boundary with the largest refining potential, from a kinetic…
Read More…resulting in the formation of uniform corrosion or separated from one another resulting in localised corrosion. The anode site is the metal surface’s less noble site or a site with…
Read More