Pristine-M process technology for drying of low rank coals Aug09

Pristine-M process technology for drying of low rank coals...

Pristine-M process technology for drying of low rank coals Pristine-M process technology for the drying of the low rank coals is being developed by Clean Coal Technologies, Inc. (CCTI). It is a patented technology for converting raw low rank coal into a cleaner burning more efficient fuel. It addresses the need for a low moisture coal which is economical to transport, stable in transportation and does not reabsorb moisture. Pristine-M is a low-cost coal de-watering technology which has succeeded in drying coal and stabilizing it cheaply using volatile matter (VM) released by the feed raw coal. Pristine-M process reduces the moisture content of low-rank coals, while also stabilizing and sealing the treated coals to prevent moisture re-absorptions and spontaneous combustion. The process also increases the calorific value (CV) of the low-rank coals to values which are comparable with the bituminous coals. Pristine-M is the third stage of the development of the process. The other two stages are ‘Pristine-SA’ and ‘Pristine’. Pristine-SA is a development stage technology designed to eliminate 100 % of the VM in the feed raw coal. For achieving stable combustion, Pristine-SA treated coal is to be co-fired with treated biomass or natural gas. The process results into a clean fuel, eliminating the need for emissions scrubbers and the corollary production of toxic flue gas desulphurization (FGD) sludge. Pristine-SA gives a versatile coal product which can be used to produce numerous non-fuel products. CCTI’s legacy technology, ‘Pristine’, is designed to remove moisture and VM, as per the requirements. The factor determining VM reduction is boiler design and the need for a certain amount of VM to remain in the coal to ensure proper burn. The end product is a cleaner burning, dry coal. CCTI’s Pristine-M technology is a patented, low-cost coal dehydration...

Non Coking Coal for Iron Production...

Non Coking Coal for Iron Production A non-coking coal is that coal which when heated in the absence of air leaves a coherent residue. This residue does not possess the physical and chemical properties of the coke and is not suitable for the manufacture of coke. Non coking coal like any other coal is an organic rock (as opposed to most other rocks in the earth’s crust, such as clays and sandstone, which are inorganic). It contains mostly carbon (C), but it also has hydrogen (H2), oxygen (O2), sulphur (S) and nitrogen (N2), as well as some inorganic constituents which are known as ash (minerals) and water (H2O). Coal was formed from prehistoric plants, in marshy environments, some tens or hundreds of millions of years ago. The presence of water restricted the supply of oxygen and allowed thermal and bacterial decomposition of plant material to take place, instead of the completion of the carbon cycle. Under these conditions of anaerobic decay, in the so-called biochemical stage of coal formation, a carbon-rich material called ‘peat’ was formed. In the subsequent geochemical stage, the different time-temperature histories led to the formations of coal of widely differing properties. These formations of coal are lignite (65 % to 72 % carbon), sub-bituminous coal (72 % to 76 % carbon), bituminous coal (76 % to 90 % carbon), and anthracite (90 % to 95 %) carbon. The degree of change undergone by a coal as it matures from peat to anthracite is known as coalification. Coalification has an important bearing on the physical and chemical properties of coal and is referred to as the ‘rank’ of the coal. Ranking is determined by the degree of transformation of the original plant material to carbon. The ranks of coals, from those with...