Heating of Steel in Reheating Furnace Jun01

Heating of Steel in Reheating Furnace...

Heating of Steel in Reheating Furnace Reheating furnace is important equipment in the process of hot rolling. It is the heart of any hot rolling mill. Reheating of steel is a continuous process. The steel material to be rolled is charged at the entrance of the reheating furnace. The steel material is pushed forward on the hearth of the furnace by means of a pusher machine whose ram is in direct contact with the steel material. The steel material is pre-heated, heated and soaked as it passes through pre-heating, heating and soaking zone of the reheating furnace. At the end of the soaking zone of the furnace, the steel material is discharged from the furnace by ejector for rolling in the rolling mill. The temperature of the heated steel material at the time of discharged depends on several factors and it can vary in the range of 1100 deg C to 1250 deg C. The size of the reheating furnace is normally expressed as the capacity to supply the rolling mill with sufficiently hot steel, in tons per hour. Steel materials with different material compositions, dimensions, and charging temperatures can reside in the furnace simultaneously. The reheating furnace used for heating the steel materials is normally considered to be having high energy consumption. It also emits good amount pollutants in the atmosphere because the process used for heat generation is the combustion process. Reheating process has considerable influence on the economics of the working of the rolling mill. There are usually three types of continuous reheating furnaces used in the rolling mills. These are (i) pusher type furnace, (ii) walking hearth furnace, and (iii) walking beam furnace. Pusher type furnaces have some disadvantages which includes (i) frequent damage of refractory hearth, (ii) skid marks...