Selection of Coal for inclusion in Coal Blend in Coke Making Sep26

Selection of Coal for inclusion in Coal Blend in Coke Making...

Selection of Coal for inclusion in Coal Blend in Coke Making Blending of coals is necessary from economical point of view by reducing the percentage of high cost, prime or hard coking coals and replacing it with medium or soft coking coals. In some coke oven plants even a small percentage of non-coking or steam coals have also been used in the blend. Selection of a proper coal blend for use in by product coke ovens is always a big challenge for the coke producer since the blend has to meet the following requirements. It is to meet the requirement of crushing during coal preparation. All the components of the coals are neither be over crushed or under crushed. The sized coal blend for charging the coke ovens is to meet the requirements of density, flow, and the size fractions. It is to have necessary coking and caking properties for producing coke of quality which meets the quality requirements of blast furnace (BF) coke. The three basic quality requirements of BF coke are (i) to provide heat for the endothermic reactions taking place in the blast furnace, (ii) to act as a reducing agent by producing the necessary reduction gases, and (iii) to provide a permeable support in the BF for the iron bearing burden. It is to provide safe pushing performance in coke ovens. It must not put excessive pressure on coke oven walls during the process of coking and damage them. It should meet the yield requirements not only of BF coke but also of coke oven gas. A proper coal blend will not produce excessive nut coke and coke breeze. It is to be economical. In view of the above varied types of requirements, the decisions regarding coal blends are not...