Sinter Quality and Process of Sintering Iron Ores Nov21

Sinter Quality and Process of Sintering Iron Ores...

Sinter Quality and Process of Sintering Iron Ores Sinter is normally the major component of the blast furnace (BF) charge burden. Sinter consists of many mineral phases produced during process of sintering of iron ores. The quality and properties of sinter are dependent on the mineral structure of sinter. However, since the sintering conditions are usually not uniform throughout the sinter bed, the phase composition, and therefore the sinter quality, varies in the sinter bed. The structure of sinter is not uniform. It consists of pores (of varying sizes) and a complex aggregate of mineral phases, each with different properties. It is the combination of these pores and mineral phases, and the interaction between them that determines the sinter quality, but also makes the prediction of sinter properties very difficult. Though a large number of investigations have been carried out on sinter, still the correlation between the chemical composition and mineralogy of sinter with its properties and behaviour is still not clearly understood. Schematics of sinter mix and the product sinter are at Fig 1. Fig 1 Schematics of sinter mix and product sinter  Sintering process is a generic term that is used to describe the process of agglomeration of a green mix of iron ores, fluxes and coke and plant solid wastes having a particle size of -10 mm so as to produce sinter  which can withstand operating pressure and temperature conditions existing in a BF. Solid wastes such as dusts, sludges, slags and mill scales etc. are used for their utilization in sinter mix because of the complex chemical structure and mineral components of these materials. The process of sintering is described in detail in a separate article which is available under the link http://ispatguru.com/the-sintering-process-of-iron-ore-fines-2/ During the process of sintering, as the...