Steel Wire Rods

Steel Wire Rods Steel wire rod is a semi-finished product which is rolled from steel billet in a wire rod mill and is used primarily for the manufacture of wire. For a steel plant it is a finished product. The steel for wire rod is produced by all the modern steelmaking processes, including the basic oxygen and electric furnace processes. Steel wire rod is usually cold drawn into wire suitable for further processing such as cold rolling, cold heading, cold upsetting, cold extrusion, cold forging, or hot forging. Although wire rod may be produced in several regular shapes (round, square, hexagonal, and rectangular), most of the wire rods rolled are round in cross section. Round wire rod is usually produced in nominal diameters of 5 mm to 15 mm, advancing in increments of 0.5 mm.  ISO 16124:2004 gives diameters of round steel wire rods ranging from 5 mm to 50 mm, advancing in increments of 0.5 mm up to 20 mm and thereafter in the increments of 1 mm. As the wire rod comes out of the rolling mill, it is formed into coils. The coils are secured either tying with a wire or strapped with a strapping band. In each coil, wire rod is continuous without any break.  Internal diameter of a wire rod coil usually varies in the range of 810 mm to 910 mm depending on the mill equipment. The external diameter of the wire rod coil depends on its weight and usually it is in the range of 1100 mm to 1300 mm. The coil weight can vary from mill to mill and normally it is in the range of 600 kg to 2.5 tons. Coil weights that exceed the capabilities of the rolling mill sometimes can be obtained by welding...