Natural gas and its Usage in Iron and Steel Industry...

Natural gas and its Usage in Iron and Steel Industry Natural gas (NG) is an environmentally friendly non-renewable gaseous fossil fuel which is extracted from deposits in the earth. It is a clean and green fuel with a high efficiency and plays a major role in helping many industries cut emissions and improve the overall air quality. It is normally supplied as (i) piped natural gas (PNG), (ii) compressed natural gas (CNG), and (iii) liquefied natural gas (LNG). Natural gas is a mixture of hydro-carbons consisting primarily of methane (CH4), generally in a percentage of over 85 % by volume. Other hydro-carbons in NG include varying amounts of various higher alkanes such as ethane, propane, and butane etc. It also contains water vapour (H2O) at varying degrees of saturation, or condensed water. It may also contain some small percentage of nitrogen (N2), carbon dioxide (CO2) and hydrogen sulphide (H2S) and helium (He) etc. NG burns with a clean blue luminous flame when mixed with the requisite amount of air and ignited. It is considered one of the cleanest burning fuels. On burning, it produces primarily heat, CO2, and water vapour. NG is a fuel found in deposits in its gas phase. It is colourless and odourless, non-toxic, and lighter than air. It does not contain olefins (hydrocarbons produced during the process of destructive distillation or reforming). It is a highly flammable and combustible gas. Its CAS number is 8006-14-2 and UN number is 1971. Quantities of natural gas are measured in normal cubic meters (corresponding to 0 deg C and 1 atmosphere pressure) or standard cubic feet (corresponding to 16 deg C and 14.73 pounds per square inch absolute pressure). The higher heat value of one cubic meter of natural gas varies from around 9500...