Synthetic Slag for Secondary Steelmaking...

Synthetic Slag for Secondary Steelmaking Synthetic slag consists of prepared mixture of several individual oxides which is used during secondary steelmaking to assist the steel treatment in the ladle from the viewpoint of effective refinement. Synthetic slag practice is normally used to obtain clean steels and also for the desulphurization of the liquid steel. Secondary steelmaking is a critical quality control step between the primary steelmaking and the continuous casting of the liquid steel. A key feature for success with the secondary steelmaking processes is the slag control. Use of synthetic slag which is specifically designed to have the required chemical composition and physical properties helps in the slag control. TheĀ  desirable properties of the synthetic slag include (i) slag is to have high sulphide capacity, (ii) it is to be basic in nature, (iii) it is to be fluid to obtain faster reaction rates, and (iv) it is not to cause excessive refractory wear. The secondary steelmaking slag is in liquid form in the ladle and floats on the surface of liquid steel which is usually at temperature of 1,600 deg or higher. It acts like a sponge to absorb the impurities consisting mainly of sulphur and non-metallic inclusions. The design of the slag is a critical step impacting the efficiency of the steel refining processes during the secondary steelmaking. Slag regime in secondary steelmaking significantly influences the final quality of the produced steel, particularly with respect to the achieved desulphurization of steel. One of the possibilities for influencing the slag regime is the application of synthetic slags to the ladle slag, formed from slag-making additions during the liquid steel tapping. Synthetic slag practice during secondary steelmaking maximizes the efficiency of the steel refining process by (i) improving steel quality, (ii) improving productivity,...